Replacement Front Cover
Replacement polycarbonate front cover for the Arduboy* and Arduboy FX.
*Kickstarter Arduboy not compatible
Recommended Skill Level: Intermediate
Requires a screwdriver and handling microelectronics.
Replacement polycarbonate front cover for the Arduboy* and Arduboy FX.
*Kickstarter Arduboy not compatible
Recommended Skill Level: Intermediate
Requires a screwdriver and handling microelectronics.
Replacement polycarbonate front cover for the Arduboy* and Arduboy FX.
*Kickstarter Arduboy not compatible
Recommended Skill Level: Intermediate
Requires a screwdriver and handling microelectronics.
Front cover of your Arduboy or Arduboy FX looking a little too “well loved” for your every day carry preferences? Handy with a screwdriver and taking things apart?
Get the Replacement Cover for the Arduboy* and Arduboy FX.
*Kickstarter Arduboy not compatible
Installing the Arduboy does require some moderate skill and is rated as intermediate difficulty, primarily due to handling of small parts. Replacing the front cover of your Arduboy is not covered by any warranty or guarantee. If during the install process, the Arduboy is damaged or parts are lost, Arduboy, Inc is not responsible. Pricing is set artificially high due to demand and availability.
Instructions:
Place Arduboy face down and unscrew 4 screws. Do not lose!
Keep Arduboy face down (or the buttons will fall out) and remove the rear cover.
Continuing to keep the Arduboy face down, carefully remove the Arduboy pcb from the front cover. Place the Arduboy PCB somewhere safe and clear of dust and debris.
Swap the buttons from the old cover to the new one.
Carefully replace the PCB and rear cover.
Screw in the 4 screws, do not overtighten!
